10 Q & A Pages for Garage Door Sites

10 Q & A Pages for Garage Door Sites

There are many possible reasons why your garage door has stopped working. Some of the reasons are quite simple and easy to manage while some are more serious. In fact, there are issues that you do very well fix on your own, especially if you have the knowledge, equipment, and of course the time needed to do it.

However, there are many reasons that require the attention and abilities of a professional. In such cases, you’d be better off leaving the garage door repair to the experts. Still, it would be helpful if you know what’s actually wrong with your garage door or at least have an idea of why it stopped working. That way, you could make the right decision on whether to do it yourself or hire a professional to fix it for you.

To help give you an idea of why your garage door suddenly stopped working, here are some of the top potential reasons:

  • Transmitter batteries are dead.
  • The photo-eye is out of alignment.
  • There is something wrong with the transmitters
  • The track is not properly aligned.
  • Springs are broken.
  • There’s something blocking the door’s path.
  • The limit setting of the garage door isn’t properly set.

The above list represents just a few of the possible reasons why your garage door isn’t working all of a sudden. It might help you troubleshoot the problem and that’s fine, but you also need to keep in mind to stop trying to open or close the door while it’s still not repaired. It would also be better and safer to park your vehicle somewhere else until everything’s okay again. But if you’re unsure of making the right diagnosis and want to get the right solution, you can always call the best garage door professionals to help you out.

Once you find out that there’s something wrong with your garage door and it needs to get fixed, one of the first thoughts you have is about how much the repair will cost. You can’t avoid asking this question, especially if you’re on a tight budget and the need for repair came all too sudden.

Still, you have to be aware that the exact cost of the repair is going to largely depend on the nature and extent of the job. The most common garage door components that require repair are the following:

  • Springs
  • Cables
  • Openers
  • Sensors
  • Tracks
  • Locks

The average cost to get your garage door repaired is about $190.00, although that actual figure is going to depend on the type and size of garage door that you have. The repairs needed to be done are also going to play a role in the cost as the more extensive the repairs, the more costly it would be.

As for the range of garage door repair costs, it’s between $125.99 and $290.00 on average. Those figures already include both labor and materials. Keep in mind that you should let a professional check your garage door first to determine if repairs can still save it or if it already requires replacement. 

Replacing your garage door is significantly more expensive as it can set you back by as much as $1,800.00. Compare that to the cost of repair, which is usually less than $200.00 on average.

A bent garage door is a common problem and it can prevent it from opening or closing properly. This problem can be caused by several factors, and one of the usual culprits is when you run your vehicle into your garage door. It’s definitely a nuisance, and you’d like to get it fixed as soon as possible. If you ignore it then it could easily lead to more serious problems later on. Whether it’s just a small dent or a large bend, you need to pay serious attention to them.


As a homeowner, you don’t have any choice but to look at the problem closely. Your garage door is supposed to go up and down seamlessly. A bend can hamper that movement and affect the normal function of your door. In the long run, the bend could also lead to problems with the track as well as the rail of your garage door.


But can a bent garage door still be fixed? Fortunately, the answer is yes. A bent garage door can certainly still be fixed. But you need to make sure that it’s done the right way. If you’re thinking of doing it yourself, you might want to change your mind if you haven’t done it before. Sure, you can learn how to do it yourself, but it’s important that it’s done properly so it would be better to simply let a professional handle it.

Your garage door is one of the most used parts of your home. So it’s important that you are aware of the potential problems that can affect it and what you can do once it happens. For example, what’s going to happen when a garage door is broken?

Garage doors are known for being tough and durable. However, if you have any illusions about them being indestructible, you better change your views right now because they aren’t. They can break down and their springs are just as prone as any other part. 

If you’re wondering what will happen when the springs get broken, there are signs that could tell you about it. Here are some of those signs that could you tell that your springs need repair:

  • A loud and sudden noise comes from your garage. If you hear that kind of noise but don’t see anything when you check it out, then it’s likely caused by a spring that just broke.
  • You’ll find a bend at the top of your garage door. This is when the top panel bends any time you try to open the door. The power of the door is just not enough to lift the door panel’s weight if the springs are broken.
  • A gap in the spring is present. If you see that there’s a gap in the spring, that’s actually one of the best indications that it’s already broken. Ideally, it should be connected from end to end and tightly wound.
  • The garage door crashes down fast. That’s what’s going to happen if the spring is broken as the counterweight against the pull of gravity is already gone.

Your garage door is one of the main openings of your home. But being an opening doesn’t mean that it needs to stay open all of the time. It needs to close, especially if you’re going to leave the house. But what if your garage door goes down and then back up again? What are the possible reasons and what can you do to keep it from happening again and again?

There are probably a number of reasons why you can’t keep your garage door closed. The following are a few of those possible reasons:

  • Travel down settings needs adjusting. Garage doors are programmed to travel specific distances before closing. However, if it closes before reaching that distance, then it senses that something’s not right.
  • Logic board already needs to be replaced. This is crucial since the logic board is considered to be the brain of your garage door opener. It can suffer from wear and tear, just like any other component, and when it does, it could cause the door to open and close, and vice versa, without reason or explanation.
  • The limit switch needs adjustment. It’s also responsible for determining where the door stops when lowering or rising. It might need adjustment if the garage door’s not staying open or closed.

Metal garage doors are very popular and have become the norm for most homes. They offer advantages such as durability and low maintenance. If you’re a homeowner, you want your garage doors to last a long time and those features help guarantee just that.

However,if there is one thing that can be considered as a major drawback to metal garage doors, it’s the fact that they are easily dented. It’s unfortunate but you need to realize that it comes with choosing that specific material for your garage door.

So what can you do about it? Just how do you fix a dent in a metal garage door? There are several methods to fix the problem, but here’s one that some professionals use to do it:

  • Prepare a mallet and a wood block.
  • Using soap and water, wash the dented surface thoroughly.
  • Go to the opposite side of the dent.
  • Make sure to place the wood block exactly over the dent.
  • Using the mallet, tap the dented area until it becomes flush with the surrounding panels.

For deep dents, it obviously needs to be smoothed out. It can be achieved by using grit sandpaper and auto body filler. Exterior paint coats can also be added to the surface after it has dried.

Automatic garage doors have become absolute necessities for everyday life. In fact, they’ve managed to become one of the busiest parts of a lot of homes. After all, a busy home where family members go out and use their vehicles a lot is sure to use their garage and garage doors several times a day.

Given how busy your garage door is, it’s certain that it’s parts or components are going to wear out fast. Among the most parts that need to be repaired or replaced is your garage door’s spring. The key fact here is that garage door springs are almost always replaced and no longer repaired. 

The typical range of the cost of replacing a broken garage door spring is between $150.00 and $350.00. It also includes the cost for replacing the two garage door springs as most garage doors have two springs. And you’ll have to replace both at the same time in case one gets broken since they can’t be repaired.

The cost of materials alone is going to range from $30.00 to $200.00 and that includes the springs, brackets, and hardware. On the other hand, the cost of labor is between $75.00 and $150.00.


Garage doors serve more than one purpose. It doesn’t just serve as an entry point to the space where vehicles are stored and secured. A garage door can also serve as a boost to the aesthetic quality of your home. However, that’s not going to happen if your garage door happens to be bowing, particularly in its middle section.

Once you notice that your garage door is indeed bowing in the middle, you obviously want to find the reason behind it. Because not only does it look bad, but could also cause some other problems later on and you don’t want that. 

There are several potential reasons why your garage door is bowing in the middle. One possible reason is exposure to the extreme elements. Extreme temperatures can also cause the bow, as the temperature outside is different from that inside. Another potential reason for the bowing is when there’s an automatic garage door attached to the center of the door and it causes the bowing in the middle.

It should be noted that all types of garage doors are vulnerable to bowing that’s caused by a centralized garage door opener. But when it comes to bowing that’s caused by weather-related factors and conditions, then wooden doors are the most prone.


Garage doors are built to last a long time. They are usually made to be tough and sturdy and can last for decades with the proper maintenance. However, you can’t help but think about the need to replace your garage door. Doing so will increase the overall value of your home significantly and also improve its aesthetic appeal in the process.

With that said, you want to know just how often you should replace your garage door. It’s a valid question, whether you want to do it immediately or set it aside for the near future. The answer will help you decide whether to do it soon or to wait a few years until it actually needs to be replaced due to damage or wear and tear.

You need to realize that the frame as well as the panels that make up a garage door are made to last a long while. You can also look at the material that the door is made from. For example, a garage door that’s made from aluminum or steel is expected to last up to 20 years. How about those that are made from wood? Given proper maintenance, then it should last around 2 decades as well.


But if you really think about it, you might need to replace your garage door after 15 years. That’s because you have to consider all of its parts, especially the main ones. A garage door opener, for instance, can last for 15 years, while other parts like springs can be used for as much as 12 years.

There are plenty of things that can go wrong with your garage door. That’s what happens when there are plenty of parts and components involved. An example of that is when your garage door’s cable breaks.

It would seem impossible to open a garage door when the cable is broken. To try and do it is very dangerous as you can get seriously injured in the attempt. But why do garage door cables break in the first place? There are several possible reasons, the number one being the effect of wear and tear.

So is it possible to open your garage door even if the cable is broken? And how do you manage to do it if it is possible? The answer is yes, you can definitely open the garage door even with the cable broken.

What you need to do is to position yourself beneath your garage door. You’ll need the help of one other individual, it could be a friend or a family member. Place a bench near the closed door. Using a crowbar, pry open the door until you and your companion can get your hands under it to lift it.

The next step is to put the bench under the door to stop it from closing again. Get another bench and put it on the other side of the door. You and your companion should position yourselves on the benches as you lift the garage door to open it up.

mansfield window replacement

100% Privacy Guaranteed.

Call Today for your Free Instant Quote...